Trolley Hoist Parts & Accessories
GB400 Gravel Bucket
GB400 gravel bucket: Capacity up to 3.5 cubic ft. and 400 lbs. The bottom discharge operates by handles on either side. The trap door is reinforced. Dimensions are: 18"w x 18in d x 24" h.
GB800 Gravel Bucket
Capacity up to 7 cubic ft. and 800 lbs. The bottom discharge has a positive shutoff to stop the flow between loads. The low profile allows more clearance under the hoist frame. Dimensions are: 30in w x 30in d x 28in h.
GB1600 Gravel Bucket
Capacity up to 14 cubic ft. and 1600 lbs. The discharge has a positive shutoff to stop the flow between loads. The bottom opening measures 10in x 10in. Dimensions are: 30in w x 30in d x 41in h.
Ballast Weights
These weights are steel encased, have an easy 3 piece
snap-lock design, are
lightweight, sturdy, and easy to carry. They are shipped empty,
but when filled with concrete weigh 50 pounds each.
6-pack of weights
10-pack of weights
Funnel, large for ballast weights
Hoisting Forks
HF1000 hoisting fork: Pivoting fork extensions fold out to form a cradle for holding rolls of felt. Up to twelve rolls can be safely nested.
Hoist forks are also available in a 1200 lb. capacity: 31in w x 63in h x 35in d, and a 2000 lb. capacity: 48in w x 63in h x 35in d.
HF2000 hoisting fork: Pivoting fork extensions fold out to form a cradle for holding rolls of felt. Up to twelve rolls can be safely nested. Capacity: 48in w x 63in h x 35in d.
Masonry fork
Trash Tray
Large trash tray: 1200 lb capacity, includes cable assembly: Ideal for tear-off debris. Load capacity of 1200 lbs., weighing 160 lbs. with overall dimensions of 90in W x 40in D x 13in H.
Small trash tray: 400 lb capacity, includes cable assembly: Ideal for tear-off debris. Load capacity of 400 lbs. weighing 56 lbs. with dimensions of 61in W x 33in D x 12in H.
Cable assembly for small trash tray
Cable assembly for large trash tray
Hand Winch
HS2000: The Swing hoist hand winch is used to raise a HydraPak to the roof with minimal operator effort. The hand winch quickly and easily mounts to the hoist frame and, with 75' of 5/32" wire rope, can raise a HydraPak up six stories
HS1000: The Swing hoist hand winch is used to raise a HydraPak to the roof with minimal operator effort. The hand winch quickly and easily mounts to the hoist frame and, with 75' of 5/32" wire rope, can raise a HydraPak up six stories
